Selection of Hot Water Circulating Pump Related Parameters
ZHANG Qin, WANG Xiao-li
DOI:10.11835/j.issn.1674-4764.2007.02.023
Received ,Revised December 15, 2006, Accepted , Available online July 01, 2015
Volume ,2007,Pages 92-94
- Abstract
In multistoried or the high-rise civil constructions the full-time machinery hot water circulation supply system design,whether the design parameters for the flow and the lift of circulating pump are appropriate or not,will be related to continuously,safe,stably running of the hot water supply system.This paper introduces parameter selections of hot water circulating pump both at home and abroad.Based on the difference of these selection means it analyzes the calculating means of the flow and the lift of circulating pump.Whether the circulator flow should join the additional circulating flow or not is the focal point in the argument.In China's present "Code for design of building water supply and drainage" the additional circulating flow is considered not flowing through the circulating pump,so in calculation the additional circulating flow does not contain the circulator flow.By analysis of the water distribution operating mode and various ring circuits difference,as well as considering that for the very small circulator flow it is more difficult to use the valve regulation and to achieve balance between various ring circuits resistance loss,inaccessible absolute circulation in the same regulation,short circuit and so on,the circulator flow should be the sum of circulating flow and additional circulating flow.To calculate lift head the additional circulating flow should be considered through the calculating loop.