Bearing Capacity Behavior of Roll Forming Filling Screw Pile
XU Xue yan,YU Lin-lin and LIU Fu-xiao
DOI:10.11835/j.issn.1674-4764.2011.03.005
Received November 18, 2010,Revised , Accepted , Available online July 01, 2015
Volume ,2011,Pages 19-24
- Abstract
Bearing capacity behavior of roll forming filling screw pile (screw pile for short) is investigated through numerical calculation and static load test. The influence of pile-type parameters, such as width of thread tooth and thread pitch, on the ultimate bearing capacity of crew pile is studied; furthermore, the bearing capacity behavior of screw pile and that of pile with the same diameter are compared and analyzed through static load test. The results show that the ultimate bearing capacity of screw pile is a bit higher than that of pile with the same outside diameter; width of thread tooth has a distinct effect on ultimate bearing capacity which increases with the increment of width of thread tooth. When the screw pile is tested under light load, the resistance on pile side is distributed along screw pile, and tip resistance is small, but the resistance rises considerably with load increasing. Besides, the design formula of bearing capacity of screw pile is proposed.