Experimental Analysis on Bending Capacity of Unbonded Prestressed Concrete Beams with HRBF500 Steel Bars
ZHENG Yimin,HE Lidong and ZHAO Yong
DOI:10.11835/j.issn.1674-4764.2012.04.006
Received ,Revised , Accepted , Available online July 01, 2015
Volume ,2012,Pages 31-37
- Abstract
The bending capacity tests on ten simple supported beams were conducted to investigate the damage characteristics, prestress increment, beading capacity and displacement ductility of unbounded prestressed concrete beams with HRBF500 steel bars. The results show that the HRBF500 steel bars has yielded before the limit state. The concrete in compression zone crushes upon the broken of the beams, which shows a sudden damage mode. The measured ultimate stress increments of unbounded tendons are in linear relationship with the comprehensive reinforcement ratio index, while the values of the ultimate stress increments are obviously higher than those values specified in the code GB50010-2010, and the average ratio of predicted values to testing values is about 0.35. The mid span deflection upon yielding of the beams is large, while the displacement ductility is bad and the average value of the displacement ductility ratio is 1.67. The displacement ductility ratio decreases with the increases of the comprehensive reinforcement ratio index. Based on the experimental results, the proposed calculation formula of ultimate stress increments of unbounded tendons was established, and it is in good agreement with the experimental results when the testing value is less than 450 MPa.